ON THE ROAD LAYOUT TUTORIAL - LISA AMIET

To recreate this great layout created by Design Team member Lisa Amiet you can follow the steps below:

Shop the products

 Uniquely Creative Products Used:

·         UCP3150 Across the Sea Paper
·         UCP3151 Far & Wide Paper
·         UCP3153 Next Exit Paper
·         UCP3154 Open Roads Paper
·         UCP3157 Speed Limit Paper
·         UCP3160 Wheels & Wings Creative Cuts
·         UCE2223 Acetate Rustic Ephemera
·         UCE2226 Blank Canvas Tag Pad – Kraft
·         UCE1809 12 x 12 Corrugated Card
·         UCE1822 Mixed Metal Cogs
·         UCE1878 Black Pearls
·         UCD2241 Cogs Die
·         UC Foam Mounts

 Other Products Used:

·         Mini Stapler, Scissors, Trimmer, Die Cutting Machine
·         Double-Sided Tape

Photo size: 4 x 6”

Step 1:   
Use Across the Sea paper as your page base. Use the Cogs die to die cut cogs from Next Exit Paper, trying to get different mixes of the colours – See image 1

   
Step 2:   
Adhere acetate tags to top and bottom of page, along with half of black creative cut to left side. Fussy cut tab from Open Roads paper, and adhere to the right side of page, along with another acetate tag, thermometer creative cut, and large die-cut gear cog – See image 2.

Step 3:
Cut a 10 x 15cm piece of Far & Wide paper and adhere to the left side of the page. Adhere an extra-large cog over the top left corner of the previous piece. Tear an approximately 8cm strip of corrugated card, and then tear two 12cm long pieces from it, distress edges and adhere to left and right sides of page, overlapping previous pieces – See image 3.

Step 4:
Use a curved edge tag from the tag pad and trace it onto Next Exit paper. Fussy cut this shape out and adhere it to the tag. Adhere the tag to the left side of your page. Adhere rose gold cog to left side, overlapping acetate. Cut a 12 x 17.5cm piece of Next Exit paper to matt photo. Adhere tab creative cut to the back of photo matt and adhere to the centre of page – See image 4.

Step 5:
Fussy cut title and tag from Speed Limit paper and layer tag with ticket creative cut, large di-cut cog, acetate ticket and staple together. Using foam dots, adhere to bottom left corner of photo stack, along with a metal cog tucked under the edge.

Step 6:
Using foam dots, adhere title to bottom left corner, overlapping previous pieces. On the right side of photo, adhere acetate film strip and use foam dots to adhere truck fussy cut from Speed Limit paper, and a small die-cut cog and small metal cog. Adhere acetate bar pieces to top and bottom of photo matt – See image 5.

Step 7:
In bottom right corner, adhere and layer acetate tags, die-cut cog, and ticket fussy cut from cut-a-part sheet. Layer a small piece of torn corrugated card, tab creative cut and small piece of torn Next Exit paper. Then adhere vent creative cut, small metal cog and half of number plate and arrow fussy cut from Speed Limit paper – See image 6.


Step 8:
To finish, adhere black pearls and use foam dots to adhere star creative cuts.